1) Grips must be modified for TOUR LOCK PRO or TOUR LOCK PRO compatible.
2) Make sure the inside of the shaft is clean and dry.
3) Insert Tour Lock Pro weight into the hole at the end of the grip so it is flush. Caution: If Tour Lock Pro weight does not fit, do not force. TLP weights will not fit in shafts with an inside diameter less then .495”.
4) With 3/16” allen wrench, turn screw clockwise (do not over tighten), four to five revolutions maximum or until snug.
5) Now it is time to hit balls and experiment for yourself the benefits of TOUR LOCK PRO technology.
TO CHANGE THE TOUR LOCK PRO WEIGHTS
1) With 3/16” allen wrench, turn screw counterclockwise until loose.
2) With 3/16”allen wrench still inserted into screw, angle the wrench slightly and pull upward to remove weight.
3) Once the weight is removed, insert a different weight following the installation instructions.
Please note this is to purchase the 75 Gram weight only.
Please note you will need to buy the Opti-Vibe Duel Tool to fit the weights | 
